Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Wolf Tooth GoatLink
$44.99
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported
Wolf Tooth Roadlink
$39.99
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Tanpan
$59.99
Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule
Wheels Manufacturing 31.8 – 26.0 Handlebar Shim
$15.95
Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black
Wheels Manufacturing The Original Single Speed Conversion Kit
$34.99
Shimano & SRAM compatible single speed conversion kit; polished silver. Includes: - (7) - 4.5mm spacers - (2) - 1mm shims
Sunlite Handlebar Shims
$5.99
- Alloy construction - Great for Cruiser or BMX bar conversions
Sunlite Lowrider Sissy Bar
$24.99
Sunlite's Lowrider Sissy Bar adds that level of style and classic looks that only a nice, long sissy bar can. Keep that banana seat comfortably slung and looking tight.
Sunlite Safety Lock Seat Clamp
$9.99
• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish
Sunlite Seat Binder Bolt Cromo
$6.99
- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm
Sunlite Single Speed Chain Guide
$39.99
Sunlite's Single Speed Chain Guide lets you turn most geared bikes into single speeds. It mounts to your derailleur hanger and takes up the chain slack for smooth, quite and chain-drop-free riding. It's made of aluminum and steel for excellent performance and durability. And it also allows adjusting the chain line to perfection for the smoothest-running drivetrain.
Shimano Dura-Ace R9150 Di2 Front Derailleur Braze-on Adaptor
$19.99
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
Salsa Lip-Lock
$19.99
Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
SRAM PowerLock Chain Connector
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM PowerLock Eagle Chain Connector 12-Speed
$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Odyssey Gyro G3 Lower Cables
$12.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Odyssey Gyro G3 Upper Cables
$12.99
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
KMC MissingLink 6-8-Speed 7.3mm
$2.29
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
FSA Headset Compression Plug
$19.99
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug. - Alloy top cap - For carbon steer tubes
FSA ISIS M12 Crank Bolts
$3.49
ISIS cranks have been around a long time, and they're still a great design. If you've got one, keep it in top working condition with these quality crank bolts from FSA. - ISIS-compatible - M12
Dimension Steerer Extender
$42.00
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
Delta Stem Raiser
$49.99
- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation
Cane Creek 110-Series 52/30mm Alloy Crown Race
$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower
Black Ops Alloy Hex Headset Spacers
$5.99
- 10mm tall, hex shaped alloy spacers in a variety of colors - Compatible with 1-1/8" headtubes - Size: 1-1/8" x 10mm
Black Ops BB Conversion Kit American to Euro
$29.99
- Aluminum cups w/ steel hardware - Converts a non-threaded 68mm American BB shell to use an English-threaded Euro BB - Shell: 68mm - Interface: American - Spindle Type: Euro - Cup Material: Alloy - Weight: 104g
Avid Post Bracket
$19.99
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
Page 1 of 1